MC Ambilights by Michał Cacko
Oscillator 1 timbre
Both sawtooth and square oscillators are enabled.
Pulse width of square oscillator is set to 60% (50% is perfectly square, 100% is very short pulsewave) and is modulated by LFO 1.
LFO 1 mod-matrix 1 modulation amount for pulse width of square oscillator is 80.
Oscillator 2 timbre
Volume level for oscillator 2 is manually set to 255.
Tone for oscillator 2 is off.
Volume (VCA) volume
Amplification level is set to -2.75dB (131) and is modulated by VCA Env.
VCA Env direct modulation amount for amplification level is 255.
Pan spread is manually set to 43.
Noise timbre
Noise level is manually set to 255.
High-pass filter (HPF) timbre
High-pass filter cut-off frequency is set to 20Hz (0) and is modulated by Mod Wheel.
Mod Wheel mod-matrix 5 modulation amount for high-pass filter cut-off frequency is 79.
Low-pass filter (VCF) timbre
Low-pass filter cut-off frequency is set to 116.5Hz (36) and is modulated by Note Vel, VCF Env.
VCF Env direct modulation amount for low-pass filter cut-off frequency is 255.
Low-pass filter envelope amount is modulated by Note Vel, Note Num.
Note Vel direct modulation amount for low-pass filter envelope amount is 128.
Note Num direct modulation amount for low-pass filter envelope amount is 255.
Filter resonance is statically set to 75% (193).
Oscillator drift & unison detuning timbre
Unison detune level is set to ±22 cents (114) and is modulated by Mod Wheel.
Mod Wheel mod-matrix 4 modulation amount for unison detune level is 50.
Oscillators drift level is manually set to 27. Drift rate is 31
Performance triggering timbre
Envelope triggering mode is set to mono.
Oscillators are reset on keyboard presses.
Oscillator 2 pitch pitch
Oscillator 2 pitch is set to 1 semitones and is modulated by LFO 1, LFO 2.
LFO 1 direct modulation amount for oscillator 2 pitch is 185.
LFO 2 mod-matrix 2 modulation amount for oscillator 2 pitch is 127.
Oscillator 2 pitch modulation is modulated by LFO 1.
LFO 1 mod-matrix 3 modulation amount for oscillator 2 pitch modulation is 44.
FX routing & levels fx
FX mode is set to Insert, and routing is
Effect 1 level is manually set to 0. Effect 2 level is manually set to 100. Effect 3 level is manually set to 100. Effect 4 level is manually set to 100.
Flanger fx
not yet complete
Reverse Reverb fx
not yet complete
Delay fx
not yet complete
Flanger fx
not yet complete
Mod Wheel modulator
Controls Unison Detune, HPF Cut-off Frequency.
| function | type | destination | amount |
|---|---|---|---|
| timbre | matrix | Unison Detune | 50 |
| timbre | matrix | HPF Cut-off Frequency | 79 |
Note Num modulator
Controls VCF Keyboard Tracking.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader | VCF Keyboard Tracking | 255 |
Note Vel modulator
Controls VCF Cut-off Frequency, VCF Envelope Velocity Sensitivity.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader-indirect | VCF Cut-off Frequency | 255 |
| menu | VCF Envelope Velocity Sensitivity | 128 |
LFO 1 modulator
Controls OSC 2 Pitch, OSC 1 Pulse Width Modulation Depth, OSC 2 Pitch Modulation Depth.
| function | type | destination | amount |
|---|---|---|---|
| pitch | fader | OSC 2 Pitch | 185 |
| timbre | matrix | OSC 1 Pulse Width Modulation Depth | 80 |
| pitch | matrix | OSC 2 Pitch Modulation Depth | 44 |
| name | value |
|---|---|
| LFO 1 Rate | 0.55Hz (90) |
| LFO 1 Delay / Fade | 0s (0) |
| LFO 1 Shape | Sine |
| LFO 1 Key Sync | off |
| LFO 1 Arp Sync | off |
| LFO 1 Mono Mode | 0 |
| LFO 1 Slew Rate | 4 |
LFO 2 modulator
Controls OSC 2 Pitch.
| function | type | destination | amount |
|---|---|---|---|
| pitch | matrix | OSC 2 Pitch | 127 |
| name | value |
|---|---|
| LFO 2 Rate | 1.08Hz (113) |
| LFO 2 Delay / Fade | 0s (0) |
| LFO 2 Shape | Square |
| LFO 2 Key Sync | off |
| LFO 2 Arp Sync | off |
| LFO 2 Mono Mode | 0 |
| LFO 2 Slew Rate | 0 |
VCA Env modulator
Controls VCA Gain for All Voices.
| function | type | destination | amount |
|---|---|---|---|
| volume | menu | VCA Gain for All Voices | 255 |
| name | value |
|---|---|
| VCA Envelope Attack Time | 0s (0) |
| VCA Envelope Decay Time | 32s (255) |
| VCA Envelope Sustain Level | 0% (0) |
| VCA Envelope Release Time | 6.38s (183) |
| VCA Envelope Trigger Mode | Key (0) |
| VCA Envelope Attack Curve | 128 |
| VCA Envelope Decay Curve | 0 |
| VCA Envelope Sustain Curve | 128 |
| VCA Envelope Attack Curve | 0 |
VCF Env modulator
Controls VCF Cut-off Frequency.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader | VCF Cut-off Frequency | 255 |
| name | value |
|---|---|
| VCF Envelope Attack Time | 0s (0) |
| VCF Envelope Decay Time | 0.05s (8) |
| VCF Envelope Sustain Level | 0% (0) |
| VCF Envelope Release Time | 26.66s (240) |
| VCF Envelope Trigger Mode | Key (0) |
| VCF Envelope Attack Curve | 128 |
| VCF Envelope Decay Curve | 0 |
| VCF Envelope Sustain Curve | 128 |
| VCF Envelope Attack Curve | 0 |